allminericky Hi, thanks for your support. Please refer to the "https://deeper-network-2.gitbook.io/deeper/" and set up our Deeper in one of these ways:
A. Standalone Modem (a device with a thin yellow wire plugged into the back of the device) and Router：Find the Ethernet cable that connects from your modem (usually from the Internet port) to the WAN port of your router, unplug it from the router’s WAN port and connect it into either one of the Ethernet ports on Deeper Connect device. Connect another ethernet cable from the remaining Ethernet port on Deeper Connect to the WAN port of your router. Generally, you are setting the Deeper Connect in between your modem.
B. Integrated Modem/Router All-in-one device: A separate standalone router is required. Connect an Ethernet cable from the LAN port (internet port) of the Integrated Modem/Router All-in-one device to either one of the Ethernet ports on the Deeper Connect device. Connect another Ethernet cable from the remaining Ethernet port on Deeper Connect to the WAN port of your separate router in order to connect to the network via the new WiFi router.
Once the device is powered, the power prompt light will stay on for 8-10 seconds followed by quick flashes. After about 2 minutes, the flashes should slow down and you should be able to access the local network (try access google search as a test), then access 11.22.33.44 or 34.34.34.34 to find the user interface login page.
The ID is admin and the password is admin. Now you can follow the manual to study the setting.
Hope this is helpful to you, thanks.
