1.1.0.c1 is giving me issue on my mini, is it possible to downgrade my firmware back to 1.1.0.b97?
What issue?
With the 1.1.0.b97 firmware I can get 30-50 tunnels to China. With 1.1.0.c1, I only get maximum 5 and it goes down to 0 from there after couple hours.
Try changing the countries you use as tunnels.
You can only get 16, which is fine, but I would recommend the following countries:
KOREA, JAPAN, SINGAPORE, USA, UK (do not use your country/region in the tunnels for improved speed)
I'm in the USA, currently I only have China for tunnel but it only has 1 tunnel.
bryron Hi Bryron, just want to share with you this. When we add a new country, it always shows 0 tunnels in the first few minutes. But it will be more tunnels after about 1 hour.
bryron This might have to do with using only China. I believe there are few people who could actually keep their connection shared for an unlimited amount of time. I am almost sure there are restrictions and limited bandwidth.
There's also the issue that upon shipping all the new minis and nanos, there are a lot more people trying to access the tunnels...
Jasperhan I know. It's shows 0 after few hours. It'll show 1 or 2 after I restart the device then drops to 0 after a few hours. After 11 hours there's only 1 tunnel. Most of the time it's at 0. With the old 1.1.0.b97, I get more than 30 tunnels.
Here's the status
JoJo On firmware 1.1.0.b97, it has a lot tunnels to China but on firmware 1.1.0.c1 there's almost none. I'm pretty sure it's the problem with the firmware.
bryron Did you try posting your Serial in the pushing post? 1.1.0.c6
You did... hopefully once it updated that will resolve your issue... I wish someone would copy their SD card and post it here. I will copy my SD as a backup of my current firmware 1.1.0.c1 and keep it just in case.
Please read this, if anyway has the new or older firmware: https://deepernetwork.cc/d/101-firmware-and-backup-because-you-dont-want-a-paper-weight
